Maintenance and Adjustment
Direction Indicator Lights
Bulb Replacement
celc
1. Indicator lens
2. Securing screw
The lens on each indicator light is held in
place by a securing screw located in the lens
of the light.
Release the screw and remove the lens to
gain access to the bulb for replacement.
112
Licence Plate Light
Bulb Replacement
Remove the front panel from the fuel tank.
Disconnect the battery, negative (black) lead
first.
1
Do not pull the licence plate bracket more
than is necessary to access the light's inside
fixing nut. Damage to the bracket will
result from pulling it too far.
2
Remove the fixings for both rear indicators.
1. Fixing, left hand side shown
2. Licence plate bracket
Carefully raise the licence plate bracket to
gain access to the locknut.
Counter-hold the locknut to prevent it from
turning and remove the licence plate light
fixing. Collect the locknut.
Detach the light from the bracket. It is not
necessary
connectors.
Caution
2
1
to
disconnect
the
electrical