Ignition Key - Triumph Speed Triple Handbook

General Information

Ignition Key

ceom
1. Key number tag
In addition to operating the steering lock/
ignition switch, the ignition key is required to
operate the seat lock and fuel tank cap.
When the motorcycle is delivered from the
factory, two keys are supplied together with a
small tag bearing the key number. Make a
note of the key number and store the spare
key and key number tag in a safe place away
from the motorcycle.
A transponder is fitted within the key to turn
off the engine immobiliser. To ensure the
immobiliser functions correctly, always have
only one of the ignition keys near the ignition
switch. Having two ignition keys near the
switch may interrupt the enable signal
between the transponder and the engine
immobiliser. In this situation the engine
immobiliser will remain on until one of the
ignition keys is removed.
40
Always get replacement keys from your
authorised Triumph dealer. Replacement keys
must be 'paired' with the motorcycle's
immobiliser by your authorised Triumph
dealer.
Do not store the spare key with the
motorcycle as this will reduce all aspects of
security.
1
Caution