Table of Contents
Advertisement
HOME
8.2.3
Restored Transmission
When the memory transmission is not properly performed, documents are kept in memory and resent
by the user operation. When the user operation is not used and the designated time has passed,
documents are automatically erased.
As a result of this, when transmission is not properly performed, it is not required to scan the documents
again, and you can resend them by easy operations.
Entry item at the time of user appointment transmission is only a remote station (dial No.).
Remote station (dial No.)
This function is used to change dial member for such case as dialed to a wrong remote station.
1)
2)
Related settings
1)
• Use the key operator-Special setting.
• The restored transmission function is enabled when there is a setting.
Note: When there is a restored transmission job, even if the setting is changed (enabled * to
2)
• 12 / 24 / 48 / 72 (hour)
• Set undelivered file holing time when there are no user operations
Specifications
1)
No. of pages for resending .... Resent from the first page
2)
Timer task ............................ Not used
3)
Restored transmission result report ...... No
4)
Resending condition ............ When the batch transmission job is not delivered, resending is also
5)
Function to inhibit combination ...... Instant batch transmission (The instant batch transmission along
The actually dialed number is displayed by default.
Abbr / Key pad can be used
Enable the restored transmission function
disabled), the job in the undelivered condition is treated as the restored transmission.
Undelivered file holding time
performed in batch.When the instant batch transmission is not de-
livered, resending is also performed in batch.
with reserved instant communications .)
Polled transmission
Manual transfer
8-8
Advertisement
Table of Contents
