Memory Transmission And Immediate Transmission; Memory Transmission; Immediate Transmission - Konica Minolta bizhub 306 User Manual

3.11

Memory Transmission and immediate transmission

3.11 Memory Transmission and immediate transmission
3.11.1

Memory transmission

The memory transmission function is enabled when the Memory TX indicator lamp of this machine is turned
on.
Tips
The factory default is [MEMORY TX].
The memory transmission function scans an original, saves it in the memory, and sends it by fax. Using this
function, you can perform an operation to send the next original during communication. (Transmission reser-
vation)
d
Reference
For details on how to use the memory transmission function, refer to page 3-3.
3.11.2

Immediate transmission

The immediate transmission function is enabled when the Memory TX indicator lamp of this machine is turned
off.
Tips
The default transmission mode is set to Memory TX. To change the normal transmission mode to the imme-
diate transmission mode, set [DEFAULT TX] to [ADF TX] in the Utility screen. For details, refer to page 7-22.
The immediate transmission function can scan the original on a page basis depending on transmission con-
ditions. This function securely sends a large amount of original.
Tips
- When specifying the immediate transmission, use the ADF. The immediate transmission is not available
when using the Original Glass.
- If the immediate transmission is specified during sending or receiving, it is handled as a transmission
reservation.
- The immediate transmission does not support a function that sends data to multiple destinations.
- The immediate transmission cannot be specified together with the specified-time transmission.
1
Load the original onto the ADF.
% For details on how to load the original, refer to page 3-5.
2
Press the Memory TX key.
The Memory TX indicator lamp turns off.
3
When necessary, specify a image quality.
% For details on Quality, refer to page 3-7.
4
Specify a destination.
5
Press the Start key.
This starts scanning and sending.
Tips
After transmission has been ended, the transmission mode returns to the default.
bizhub 306/266
3
3-24