Replacement Of The Speaker - Konica Minolta FK-101 Service Manual

HOME
2.
3.

6.2.2 Replacement of the Speaker

[NOTE] It is required to remove the one-touch program key first for the replacement of the speaker.
1.
2.
3.
Connect the connector to the new one-touch program key as follows:
One-touch program key
Attach a one-touch program key
Refer to 6.2.1 and remove the one-touch program key first.
Remove the one-touch program key.
Replace the speakers as indicated in the following picture.(two screws and a connector (with
an adapter on the speaker side))
Speaker
Attach a speaker in the reverse order of the above.
Connector
Connector
Adapter
6-7