Basic Specifications; General Specifications - Konica Minolta FK-101 Service Manual

HOME

1.1 Basic Specifications

1.1.1 General Specifications

(1) Applicable lines ................... PSTN
(2) Protocol ............................... Group 3 (compliant to ITU-T T.30)
(3) Maximum data rate .............. 33,600bps
(4) Coding method .................... MH, MR and MMR
(5) Modulation method .............. V27ter, V29, (V.33), V17, V8 and V34
(6) Communication resolution ... Normal
(7) Fax memory size ................. 2 Mbyte Standard (allocated in the ERDH memory )
(8) FAX memory backup ........... Yes
F network (1300H receptions are possible.Only Japan)
• ECM
• F-code communication
• Konica non-standard protocol : No
• Group 4 : No
• V.33 is for reception only.
8 × 3.85 lines / mm
8 × 7.7 lines / mm
Fine
8 × 15.4 lines / mm (reception only)
Super fine
16 × 15.4 lines / mm
Super fine
200 × 200 pixels / inch
Fine
400 × 400 pixels / inch
Super fine
• Fixed to mm at transmission
• mm and inch are available at reception.
• Selection by using the [RESOLUTION] key.
• You can not change settings on every page.
•
In case of standard ERDH memory (32Mbyte): 4 Mbyte maxi-
mum. Possible to add in steps of 2 Mbyte
• In case of ERDH memory expansion (even 1 piece) : 16 Mbyte
maximum.
Within 60 minutes (when batteries are full)
• Secondary battery
• Charging time: 28 hours
• Life: charging and discharging 5000 times
1-1