Replacement Of The Fax Control Board - Konica Minolta FK-101 Service Manual

HOME

6.1.3 Replacement of the FAX Control Board

[NOTE] Since the board may be damaged due to static electricity, take a measure against static electricity
1.
FAX control board
2.
before replacement.
Since the FAX control board is connected to the NCU board below with a connector, take care
not to damage the connector when you remove the board.
Remove the FAX control board. (8 screws)
Attach a new FAX control board in the reverse order of the above.
Connector
NCU board
6-4