Introduction Of Fax Transmission Function - Konica Minolta bizhub C3851 Quick Start Manual

6.3 Using the fax function
3
Enter a fax number.
% You can select the desired destination from the pre-registered destination list, or directly enter des-
tination information. For details on how to register a destination, refer to page 6-20.
% Specifying multiple destinations carries out computer sending and fax transmission simultaneously.
4
Specify the size of the original to be scanned.
% The size of the original can be specified in [Scan Size] (default: [8-1/2 e 11] (inch area)/[A4] (centim-
eter area)). If you fail to set the original size correctly, the image may be cut off.
5
Configure the option settings for fax transmission as necessary.
% For details on optional settings, refer to [Fax] in the User's Guide CD.
6
Press the Start key.
% Tap [Check Setting] before sending, and check the destination and settings as necessary.
% To redo operations for specifying destinations or option settings, press the Reset key.
% If the screen to confirm the specified destination or settings appears, check the contents, then tap
[Send].
% If the keyboard screen appears, enter the specified password, then tap [Send]. For the password,
contact the administrator of this machine.
Transmission begins.
% If you press the Stop key while scanning an original, the scanning process stops, and a list of
stopped jobs appears. To redo scanning of the original, delete the job from the list of inactive jobs.
6.3.3

Introduction of fax transmission function

This section describes convenient fax transmission functions. For details on how to use each function, refer
to [Fax] in the User's Guide CD.
Function
Timer TX
Check Dest. & Send
bizhub C3851FS/C3851/C3351
Overview
Timer TX automatically starts sending at a specified time if the time is pre-
specified.
Check Dest. & Send checks the fax number specified for the fax transmission
against the destination fax number (CSI) and sends the fax only when they
match.
6
6-11