FLIR D-Series C Installation Manual page 26

2 Basic Operation and Configuration
When the Maintenance menu is selected, the following Server Status page appears.
LAN Settings
The LAN Settings page can be used to set the hostname, default gateway, and IP address for the
camera. The default IP Address mode is static; the mode can also be set to DHCP. When the IP
address of the camera is changed, the PC may no longer be on the same network and therefore may
not be able to access the camera until the IP address on the PC is changed also. For that reason, it
may a good idea to change the IP address after making other configuration changes.
On the LAN Settings page for the D-Series camera there are two IP Interfaces. The network address
for the camera is interface eth0, and internally the camera communicates using interface eth1.
2-12 427-9030-01-12 Rev 130 Mar 2014