Navigation Panel - ZyXEL Communications P-660HW-Tx v3 User Manual

Chapter 2 Introducing the Web Configurator

2.2.2 Navigation Panel

Use the menu items on the navigation panel to open screens to configure ZyXEL
Device features. The following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK TAB
Status
Network
Internet Internet
(WAN)
Access Setup
More
Connections
WAN Backup
Setup
Local IP
Network
(LAN)
DHCP Setup
Client List
IP Alias
Wireless LAN AP
More AP
WPS
WPS Station
WDS
Scheduling
NAT General
Port
Forwarding
Address
Mapping
ALG
Security
34
FUNCTION
This screen shows the ZyXEL Device's general device and network
status information. Use this screen to access the statistics and
client list.
Use this screen to configure ISP parameters, WAN IP address
assignment, DNS servers and other advanced properties.
Use this screen to configure additional WAN connections.
Use this screen to configure a backup gateway.
Use this screen to configure LAN TCP/IP settings, enable Any IP
and other advanced properties.
Use this screen to configure LAN DHCP settings.
Use this screen to view current DHCP client information and to
always assign specific IP addresses to individual MAC addresses
(and host names).
Use this screen to partition your LAN interface into subnets.
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Use this screen to configure multiple BSSs on the ZyXEL Device.
Use this screen to configure WPS (Wi-Fi Protected Setup)
settings.
Use this screen to set up a WPS wireless network.
Use this screen to set up Wireless Distribution System links to
other access points.
Use this screen to configure the dates/times to enable or disable
the wireless LAN.
Use this screen to enable NAT.
Use this screen to make your local servers visible to the outside
world.
This screen appears when you choose SUA Only from the NAT >
General screen.
Use this screen to configure network address translation mapping
rules.
This screen appears when you choose Full Feature from the NAT
> General screen.
Use this screen to enable or disable SIP ALG.
P-660HW-Tx v3 User's Guide