Mac Filter - ZyXEL Communications P-660HW-Tx v3 User Manual

Table 27 Network > Wireless LAN > AP: Advanced Setup
LABEL
802.11 Mode
Back
Apply
Cancel

7.2.6 MAC Filter

Use this screen to change your ZyXEL Device's MAC filter settings. Click the Edit
button in the AP screen. The screen appears as shown.
Figure 35 Network > Wireless LAN > AP: MAC Address Filter
P-660HW-Tx v3 User's Guide
DESCRIPTION
Select 802.11b Only to allow only IEEE 802.11b compliant WLAN
devices to associate with the ZyXEL Device.
Select 802.11g Only to allow only IEEE 802.11g compliant WLAN
devices to associate with the ZyXEL Device.
Select Mixed to allow either IEEE 802.11b or IEEE 802.11g compliant
WLAN devices to associate with the ZyXEL Device. The transmission rate
of your ZyXEL Device might be reduced.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 7 Wireless LAN
139