The Vlans Port Setting Screen - ZyXEL Communications P-660HW-Tx v3 User Manual

Chapter 15 VLANs

15.3 The VLANs Port Setting Screen

Use this screen to configure the PVID and assign traffic priority for each port. Click
Advanced > VLANs > Port Setting to display the following screen.
Figure 96 Advanced > VLANs > Port Setting
The following table describes the labels in this screen.
Table 69 Advanced > VLANs > Port Setting
LABEL
Ports
802.1Q PVID
802.1P Priority
Apply
Cancel
252
DESCRIPTION
This field displays the types of ports available to join the VLAN group.
Assign a VLAN ID for the port. The valid VID range is between 1 and
4094. The ZyXEL Device assigns the PVID to untagged frames or
priority-tagged frames received on this port.
Assign a priority for the traffic transmitted through the port. Select
Same if you do not want to modify the priority. You may choose a
priority level from 0-7, with 0 being the lowest level and 7 being the
highest level.
Click this to save your changes.
Click this to restore your previously saved settings.
P-660HW-Tx v3 User's Guide