Customized Services - ZyXEL Communications P-660HW-Tx v3 User Manual

Table 47 Security > Firewall > Rules: Edit (continued)
LABEL
Send Alert
Message to
Administrator
When Matched
Back
Apply
Cancel

9.3.2 Customized Services

Configure customized services and port numbers not predefined by the ZyXEL
Device. For a comprehensive list of port numbers and services, visit the IANA
(Internet Assigned Number Authority) website. See
some examples. Click the Edit Customized Services link while editing a firewall
rule to configure a custom service port. This displays the following screen.
Figure 64 Security > Firewall > Rules: Edit: Edit Customized Services
The following table describes the labels in this screen.
Table 48 Security > Firewall > Rules: Edit: Edit Customized Services
LABEL
No.
Name
Protocol
Port
Back
P-660HW-Tx v3 User's Guide
DESCRIPTION
Select the check box to have the ZyXEL Device generate an alert when
the rule is matched.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
This is the number of your customized port. Click a rule's number of a service
to go to the Firewall Customized Services Config screen to configure or
edit a customized service.
This is the name of your customized service.
This shows the IP protocol (TCP, UDP or TCP/UDP) that defines your
customized service.
This is the port number or range that defines your customized service.
Click this to return to the Firewall Edit Rule screen.
Chapter 9 Firewalls
Appendix E on page 421 for
193