The View Log Screen - ZyXEL Communications P-660HW-Tx v3 User Manual

Chapter 21 Logs

21.2 The View Log Screen

Use the View Log screen to see the logs for the categories that you selected in
the Log Settings screen (see
Logs to open the View Log screen.
Entries in red indicate alerts. The log wraps around and deletes the old entries
after it fills. Click a column heading to sort the entries. A triangle indicates
ascending or descending sort order.
Figure 118 Maintenance > Logs > View Log
The following table describes the fields in this screen.
Table 88 Maintenance > Logs > View Log
LABEL
Display
Email Log Now
Refresh
Clear Log
Save Log
#
Time
Message
Source
310
Section 21.3 on page
DESCRIPTION
The categories that you select in the Log Settings screen display in the
drop-down list box.
Select a category of logs to view; select All Logs to view logs from all of
the log categories that you selected in the Log Settings page.
Click this to send the log screen to the e-mail address specified in the
Log Settings page (make sure that you have first filled in the E-mail
Log Settings fields in Log Settings).
Click this to renew the log screen.
Click this to delete all the logs.
Click this to save the log record file to your computer.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming
packet.
311). Click Maintenance >
P-660HW-Tx v3 User's Guide