ZyXEL Communications P-660HW-Tx v3 User Manual page 320

Chapter 21 Logs
Table 101 Attack Logs (continued)
LOG MESSAGE
NetBIOS TCP
ip spoofing - no routing
entry [ TCP | UDP | IGMP
| ESP | GRE | OSPF ]
ip spoofing - no routing
entry ICMP (type:%d,
code:%d)
vulnerability ICMP
(type:%d, code:%d)
traceroute ICMP (type:%d,
code:%d)
Table 102 802.1X Logs
LOG MESSAGE
RADIUS accepts user.
RADIUS rejects user. Pls check
RADIUS Server.
User logout because of session
timeout expired.
User logout because of user
deassociation.
User logout because of no
authentication response from
user.
User logout because of idle
timeout expired.
User logout because of user
request.
No response from RADIUS. Pls
check RADIUS Server.
Use RADIUS to authenticate user. The RADIUS server is operating as the
No Server to authenticate user.
Table 103 ACL Setting Notes
PACKET
DIRECTION
(L to W)
(W to L)
320
DESCRIPTION
The firewall detected a TCP NetBIOS attack.
The firewall classified a packet with no source routing
entry as an IP spoofing attack.
The firewall classified an ICMP packet with no source
routing entry as an IP spoofing attack.
The firewall detected an ICMP vulnerability attack.
The firewall detected an ICMP traceroute attack.
DESCRIPTION
A user was authenticated by the RADIUS Server.
A user was not authenticated by the RADIUS
Server. Please check the RADIUS Server.
The router logged out a user whose session
expired.
The router logged out a user who ended the
session.
The router logged out a user from which there
was no authentication response.
The router logged out a user whose idle timeout
period expired.
A user logged out.
There is no response message from the RADIUS
server, please check the RADIUS server.
authentication server.
There is no authentication server to authenticate
a user.
DIRECTION DESCRIPTION
LAN to WAN ACL set for packets traveling from the LAN to the
WAN.
WAN to LAN ACL set for packets traveling from the WAN to the
LAN.
P-660HW-Tx v3 User's Guide