Chapter 1 Introducing the ZyXEL Device
1.7.1 Turn the Wireless LAN Off or On
Make sure the POWER LED is on (not blinking).
1
The wireless LAN of the ZyXEL Device is enabled by default, so the LED lights
2
green. If not, press the WIFI button for 5 to 6 seconds and release it when the
LED turns green. The Wireless LAN is on. If you want to turn it off, press the WIFI
button for 5 to 6 seconds again. The WiFi LED will initially turn to orange then
turn off: release the button after the LED turns off.
Figure 3 Wireless LAN On/Off
WLAN on (default)
1.7.2 Activate WPS
Make sure the POWER LED is on (not blinking).
1
Check if the LED lights green (wireless LAN on). If not, press the WIFI button for
2
5 to 6 seconds and release it when the LED turns green. Then press the WIFI
button again for 1 to 2 seconds and release it when the LED turns orange. Press
the WiFi or WPS button on another WPS-enabled device within range of the ZyXEL
Device. The WiFi LED should blink orange while the ZyXEL Device sets up a WPS
connection with the wireless device. When the WPS connection has been
configured successfully, the LED will become green.
28
1-2s
5-6s
WLAN off
WLAN on (default)
5-6s
WLAN off
P-660HW-Tx v3 User's Guide