Network Driver - NEC BladeServer Express5800 Series User Manual

Network Driver

Configure the settings of the network driver.
The standard network driver will be installed automatically, but the link speed and Duplex mode
need to be specified manually.
[When PROSet is not installed]
1.
Open [Local Area Connection Properties].
* For the standard start menu:
1. Click [Start], click [Control Panel], click [Network Connections], and click [Local
Area Connection].
* For the classic start menu
1. Click Start, click [Settings], and click [Network Connections].
The [Network Connections] dialog box appears.
2. Right-click [Local Area Connection] and click [Properties].
2.
Click [Configure].
The properties dialog box for the network adapter appears.
3.
Click the [Advanced] tab and specify [Link Speed & Duplex] values that match the hub.
4.
Click [OK].
[When PROSet is installed]
1.
Open [Intel(R) PROSet].
* For the standard start menu:
Click [Start], click [Control Panel], click [Administrative Tools], and click
[Computer Management]. Double-click the [(Network Adapter Name)] in the
Network Adapter list.
* For the classic start menu:
1. Click Start, click [Settings], and click [Control Panel].
2. Click [Administrative Tools].
3. Click [Computer Management] and double-click the [(Network Adapter Name)] in
the Network Adapter list.
2.
Click the [Link] tab and specify [Speed and Duplex] values that match the hub.
3.
Click [Apply] and then click [OK].
Also, add or delete any protocols and services if necessary.
Installing the Operating System with Express Setup 5-19