Figure 1.6 Multiple Printer Dimensions - Kodak VERSAMARK DS5110 Operator's Manual

Chapter 1. Getting Started
Setting Up the Printhead
You can further verify accurate printhead positioning by ensuring that the
distance between substrates is equal to or greater than the cue distance
for the most downstream printhead.
In multiple printer configurations, all printers to be used for the job must
be selected to print and must be configured according to the system
software being used. (See your system software operator's manual for
details.)
Figure 1.6 Multiple printer dimensions
Distance between substrates
Feedstroke
Cue
sensor
Image
Cue
length distance
Substrate direction
Synchronization (Cue Checking) options must be enabled for all printers
and all printers must be set for the same cue error response. (See your
system software manual for details on setting this parameter.)
Operator's Guide 1 - 9