Kodak VERSAMARK DS5110 Operator's Manual page 40

Chapter 3. Troubleshooting
Identifying Printing Problems
#2 #3
3 - 4
Extra Dots
At even higher voltages, extra drops may occur. Extra drops may also
appear between the second and third bars of a test pattern when the
charge voltage is too low.
At the highest voltages an inkjet (or printhead) short may occur. When
this error occurs, the [ERROR] light flashes. (See your system
software operator's manual for details on error messages.)
Voltage defects appear on test prints as extra dots of ink that appear
near the center of the printed image or across the bottom the image.