Kodak VERSAMARK DS5110 Operator's Manual page 13

Chapter 1. Getting Started
The DH5110 printhead is 1.0 inch (2.54 cm) wide. Vertical resolution is
fixed at 120 dpi and spans the width of the printhead array. Horizontal
resolution is in the direction of substrate movement and can be set to 120
or 240 dpi. Resolution is measured in dots per inch (dpi). The DS5110 is
capable of printing 100-percent variable data at a print speed of up to
1000 fpm.
After installation, basic setup procedures must be performed before
printing can begin. Along with a brief overview of the system components,
this chapter describes the required setup procedures, which include
supporting the printhead, setting up the printhead, printing at angles,
positioning multiple printheads, and determining cue values.
Operator's Guide 1 - 1