Table of Contents
Advertisement
How to select Pilot data record to be modified
To select Pilot data to be modified open Edit sheet. In a Record field Current indicates Pilot data which is currently
to be modified. You have three alternatives to select desired Pilot data of route:
•
Enter desired number of Pilot data in Record field to Current edit box. To modify Current's
number take cursor to edit box and press Select button. Enter desired number and press OK.
•
Use First, <<, >>, Last buttons to find desired Pilot data.
•
Use INFO/HELP push button to select Pilot data. Take cursor into the Electronic chart area
above desired Pilot data and press INFO/HELP push button.
Change Pilot data record position
To change position of Pilot data you have three alternatives to do it:
•
Enter latitude and longitude to Position field.
•
Drag and drop Pilot data with CHART ALIGN push button.
Enter latitude and longitude to Position field:
1. Select Edit sheet open.
2. Select desired Pilot data.
3. Enter co-ordinates of latitude and longitude to Position field. To modify co-ordinate of
Latitude take cursor to Lat edit box and press Select button. Enter co-ordinate and press OK.
To the same way to modify co-ordinate of longitude.
Drag and drop Pilot data to new position:
CHART ALIGN pushbutton
Change other data of Pilot data record
To change other data of Pilot data, such as range and text, proceed as follows:
1. Select desired Pilot data record. For more information to select Pilot data, see "How to select
Pilot data record to be modified" on page 289.
2. Take cursor to desired edit box and press Select button. Modify field's value and press OK.
Delete a Pilot data record
To delete a Pilot data record, proceed as follows:
1. Open Edit sheet.
2. Select desired Pilot data record to delete. For more information to select Pilot data record to
modified, see "How to select Pilot data record to be modified" on page 289.
3. Press Delete button in Edit record sheet.
1.
Select Edit sheet open.
2.
Take cursor into the Electronic chart area above desired Pilot data.
3.
Press CHART ALING push button and move cursor to desired position.
Keep CHART ALIGN button pressed down while you move cursor and release
it when cursor is in right position.
Pilot data • • • • 289
Advertisement
Table of Contents
