Information Area - Furuno FEA-2100 Operator's Manual

Electronic chart display and information system
Hide thumbs Also See for FEA-2100:
Table of Contents

Advertisement

Information Area

There is in the Information area where it is permanently displayed information about the position of own ship and the
route monitoring (upper part of the area) and information of cursor's location on the chart (lower part of area).
Information from the positioning sensors:
Latitude and Longitude
GYRO readings and source of it
CMG (Course made good) and source of it
SMG (Speed make good) and source of it
Positioning source, which can be: Dead Reckoning, GPS, DGPS, LORAN, FILTER etc.
Information of used datum, which is shown above positioning source. (WGS 72, WGS 84, European 1950 etc.)
Information from Route monitoring:
Plan Speed
Plan CTS (Course to steer)
Ch limit
Next WP
Turn radius
Turn rate
Information, which has calculated from data of positioning sensors and from data of Route monitoring by the system:
Route CTS
Off track
Dist WOP (wheel over point)
ETA (Estimated Time of Arrival) wop
Next CTS
30 • • • • ECDIS Screen

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fea-2105

Table of Contents