Used Presentation - Furuno FEA-2100 Operator's Manual

Electronic chart display and information system
Hide thumbs Also See for FEA-2100:
Table of Contents

Advertisement

Used presentation

The ECDIS uses S52 standard presentation for all non chart objects. Both S57 and ARCS uses S52 standard
presentation. User can check the used presentation library from both S57 and ARCS: Chart Plan - System - S52
Presentation library. The reason for changes has been ECDIS type approval requirements together with legal
presentations defined in ECDIS type approval standards.
significantly changed presentation:
Object
User Chart Line features
User Chart Area features
User Chart Symbol features
User Chart Drawing point features
Reference Target features
Pilot data
Planned route center line
Planned route border line
Monitored route center line
Monitored route border line
Own ship speed vector
ARPA target speed vector
Nav Mark VRM features
8 • • • • Changes since release B1.16
As a consequence following non chart object has
Old presentation
Various blue lines
Transparent blue area with blue line
around
Various blue characters
Blue box with a blue D symbol inside
Blue box with a blue R symbol inside
Orange box with a orange i symbol
inside and an orange range circle.
Red dashed line
Red dashed line
Red solid line
Red solid line
Black line with a hole at each minute.
No arrow head mark.
Green solid line. No arrow head
mark.
Two different line styles of orange
colour - one for first VRM and
another for second VRM
New presentation
Various dark yellow or red lines.
Red is used if the Line is set as
dangerous.
Transparent dark yellow area with
either dark yellow or red line
around. Red is used if the Area is
set as dangerous.
Various
dark
yellow
characters.
Red is used if the
Symbol is set as dangerous.
Dark yellow circle with a line inside
Dark yellow circle with a ! symbol
inside
Orange box with a orange i symbol
inside. and an orange range circle
and back text.
Orange dotted line
Orange solid line
Red filled circle line
Red solid line
Black line with a short line at each
minute. An arrow head mark in the
end of speed vector which indicates
water or ground stabilisation.
Green line with a short line at each
minute. An arrow head mark in the
end of speed vector which indicates
water or ground stabilisation.
Theoretically two different line
styles of orange colour as before,
but because of drawing rules
defined in ECDIS standards they
are both presented normally as
dashed lines.
or
red

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fea-2105

Table of Contents