Typical Error Messages Of The Telecomm Connection To A Renc - Furuno FEA-2100 Operator's Manual

Electronic chart display and information system

Hide thumbs Also See for FEA-2100:

Table of Contents

6. When the ECDIS has downloaded all the

data which was requested, following window

appears. You can now close the connection.

Typical error messages of the Telecomm connection to a RENC

You have not set the server address of the

RENC. Select a suitable one from the list of

the RENC Telecomm manager.

If the list of the RENC Telecomm manager do

not contain the suitable address, you can

specify the server address in the Installation

paramters. See separate Technical Manual.

Telecomm connection was broken.

Connect Telecomm again.

The system cannot get connection to the

RENC server. Telecomm can be connected or

not connected.

Close Telecomm connection. Then connect

Telecomm and try again..

Vector Chart material • • • • 105