Configuring IP Addressing, Time Synchronization, Interface Access, and System Information
System Information
Configure the Time and Date. The switch uses the time command to con-
figure both the time of day and the date. Also, executing time without param-
eters lists the switch's time of day and date. Note that the CLI uses a 24-hour
clock scheme; that is, hour (hh) values from 1 p.m. to midnight are input as
13 - 24, respectively.
Syntax:
For example, to set the switch to 3:45 p.m. on October 1, 2000:
SMC6624M(config)# time 15:45 10/01/00
N o t e
Executing reload or boot resets the time and date to their default startup values.
Web: Configuring System Parameters
In the web browser interface, you can enter the following system information:
I
I
I
For access to the MAC Age Interval and the Time parameters, use the menu
interface or the CLI.
Configure System Parameters in the Web Browser Interface.
1.
2.
3.
4.
5-44
time [hh:mm[:ss]] [mm/dd/ [yy]yy]
System Name
System Location
System Contact
Click on the Configuration tab.
Click on [System Info].
Enter the data you want in the displayed fields.
Implement your new data by clicking on [Apply Changes].