How To Move Between Levels - SMC Networks SMC6624M Management Manual

Using the Command Line Interface (CLI)
Using the CLI

How To Move Between Levels

Change in Levels
Operator level
to
Manager level
Manager level
to
Global configuration
level
Global configuration
level
to a
Context configuration
level
Context configuration
level
to another
Context configuration
level
Move from any level
to the preceding level
Move from any level
to the Manager level
Moving Between the CLI and the Menu Interface. When moving
between interfaces, the switch retains the current privilege level (Manager or
Operator). That is, if you are at the Operator level in the menu and select the
Command Line Interface (CLI) option from the Main Menu, the CLI prompt
appears at the Operator level.
Changing Parameter Settings. Regardless of which interface is used (CLI,
menu interface, or web browser interface), the most recently configured
version of a parameter setting overrides any earlier settings for that parameter.
3-6
Example of Prompt , Command, and Result
SMC6624M> enable
Password:_
After you enter
appears. After you enter the Manager
password, this prompt appears:
SMC6624M#_
SMC6624M# config
SMC6624M(config)#
SMC6624M(config)# vlan-10
SMC6624M(vlan-10)#
SMC6624M(vlan-10)# interface ethernet 3
SMC6624M(int-3)#
SMC6624M(int-3)# exit
SMC6624M(config)# exit
SMC6624M2# exit
SMC6624M2>
SMC6624M(int-3)# end
SMC6624M#
—or—
SMC6624M(config)# end
SMC6624M#
enable
, the Password prompt