Creating User Names And Passwords In The Browser Interface - SMC Networks SMC6624M Management Manual

This window is the launching point for the basic configuration you need to
perform to set web browser interface passwords to maintain security.
To set web browser interface passwords, click on secure access to the device
to display the Device Passwords screen, and then go to the next page. (You
can also access the password screen by clicking on the Security tab.)
Creating User Names and Passwords in the Browser
Interface
You may want to create both a user name and password to create access
security for your switch. There are two levels of access to the interface that
can be controlled by setting user names and passwords:
Operator. An Operator-level user name and password allows read-only
I
access to most of the web browser interface, but prevents access to the
Security window.
Manager. A Manager-level user name and password allows full read/
I
write access to the web browser interface.
Figure 4-3. The Device Passwords Window
Using the Web Browser Interface
Tasks for Your First Web Browser Interface Session
4-7