Sensors (Hipath 33X0/35X0 Only); Radio Paging (Not For U.s.) - Siemens HiPath 2000 Operating Instructions Manual

More functions/services
Step by Step

Sensors (HiPath 33x0/35x0 only)

If configured (contact your service personnel), sensors
are able to recognize signals, call your phone, and dis-
play an appropriate message on the screen.

Radio paging (not for U.S.)

If radio paging equipment (PSE) is connected to your
system (contact your service personnel), you can locate
people via their pocket receivers.
Pocket receivers signal a call request to the person you
want to page. This person can then answer the page at
the nearest phone.
Paging persons
To ensure that you can be found, you must have en-
abled a ringing group page 80, call forwarding
page 30 or call forwarding-no answer (service techni-
cian) to the internal station number of your PSE.
A call request is signaled automatically.
Answering the page from the nearest telephone
^
Lift the handset.
)59
Enter the code.
j
Enter own station number.
77