Controlling Relays; (Only For Hipath 3000); Sensors (Hipath 33X0/35X0 Only) - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
*90=Control Relay On?
#90=Control Relay Off?
1

Controlling relays

(only for HiPath 3000)

If this function has been configured (contact your ser-
vice personnel), you can use up to four relays to enable/
disable different devices (such as a door opener).
Depending on how you program the relays, you can ac-
tivate and deactivate them manually them or configure
them to activate and deactivate automatically (after tim-
eout).
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC
network)
Select and confirm the option shown,
or
select and confirm the option shown.
4
... Enter the relay.

Sensors (HiPath 33x0/35x0 only)

If configured (contact your service personnel), sensors
are able to recognize signals, call your phone, and dis-
play an appropriate message on the screen.
More functions/services
page 88!
77