Using Team Functions; Activating/Deactivating A Group Call - Siemens HiPath 2000 Operating Instructions Manual

Using team functions

Step by Step
Leave group?
Join group?
Leave group?
Join group?
78
Using team functions
If configured (consult your service personnel), your tele-
phone is part of a team. The team consists of internal
phones that are able to use certain functions.

Activating/deactivating a group call

Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work)
If configured (consult your service personnel), you be-
long to one or more groups of stations, which can be
reached via hunt group or group call station numbers.
Incoming calls are signaled one after the other (= hunt
group) or simultaneously (= group call) on all phones in
the group, until a group member answers the call.
Each station in the group can still be reached via their
personal station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group.
You are part of a hunt group or call group
$
Open the idle menu
Select and confirm the option shown
or
select and confirm the option shown
You belong to multiple groups
$
Open the idle menu
Select and confirm the option shown
or
select and confirm the option shown
[1] "Differing display view in a HiPath 4000 environment"
page 83!
page 17.
page 17.
[1]
,
[1]
.
[1]
,
[1]
.
page 93