Using The Speakerphone - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
Mute off?
HF answerback on?
HF answerback off?

Using the speakerphone

A colleague addresses you directly over the speaker
with a speaker call. You hear a tone before the an-
nouncement. The other party's name or station number
appears on the screen.
You can conduct the call with the handset or in speaker-
phone mode (OpenStage 20/20 G only).
^
Lift the handset and answer the call.
or
Press the "OK" key to confirm your selection and answer
the call.
or
p
Press the key and answer the call.
OpenStage 20/20 G only: If handsfree answer-
back is enabled (see below), you do not need to
switch on the microphone - you can answer di-
rectly. You can answer immediately in speaker-
phone mode.
If handsfree answerback is disabled (default set-
ting), follow the procedure described above.
Placing a speaker call to a colleague
Enabling and disabling handsfree answerback
$
Open the idle menu
Select and confirm the option shown,
or
select and confirm the option shown.
Enhanced phone functions
page 17.
page 46.
37