Table of Contents
Advertisement
Voice Warning
Intensive Recording Overview
Enabling Intensive Recording
________________________________________________________________________________________________________
52
The DVR can be set to play a sound file when either a Motion or Sensor event occurs.
This file can be a custom created sound file that is unique to the application. The
selected .wav file plays through speakers attached to the DVR by the user.
1.
Click the Browse button to locate a .WAV file. The selected file will display in the
Sounds box.
2.
Click the Test icon to verify the audio file.
3.
Select Activate on Motion, Activate on Sensor (Alarm), and or Activate on
Sabotage Detection to trigger the audio file.
The Intensive Recording Option allows an increase of the Images Per Second and the
resolution of any camera recording using sensor activation.
The Intensive Recording option is set up as an 'All or Nothing'. This means that once
enabled (associated with sensors) all cameras that are associated with sensors will
activate the Intensive Recording.
To activate the Intensive Recording option, follow these steps.
1.
Click the Setup button on the Display Screen.
2.
Click the General tab.
3.
Select Enable Intensive Recording on Sensor or on Motion.
4.
Click Apply.
Test Sound File
Locate Sound File
Advertisement
Table of Contents
