Sensor Setup
Configure Hybrid
(IP) Sensors*
Associate Sensor w/ PTZ Presets
Configure Sensor Response
________________________________________________________________________________________________________
72
The Sensor tab sets options to enable, disable, and configure sensors.
Enter Custom
Sensor/Control Names
Click Setup on the Live View screen.
1.
Click the Sensor tab to open the Sensor and Output Display.
2.
Click to select NO or NC for the desired sensor.
3.
Enter the Delay Time to define the number of seconds after the sensor is tripped
4.
until the associated relay is activated.
Tip
Associate sensors and relays with cameras when creating a recording
schedule.
5.
Click Apply.
Open the On-Screen Keyboard
*HVR/NVR upgrade necessary to use this feature