Network Setup - Honeywell Fusion IV User Manual

Network Setup

________________________________________________________________________________________________________
74
Caution Do not join this DVR to a Network Domain. Domains force policies that can
negatively affect the DVR. Domains, by default, require the user to press
CTRL-ALT-DEL to login, however this keyboard combination is disabled on
the local DVR and the software will not be able to load.
Network Setup
Time Out Value When attempting to connect to the DVR, if the connection does
not succeed during the timeout period (seconds), the
connection will be terminated.
Emergency Port Used to connect to the Alarm Monitor software.
Center Port Used to connect to the Fusion remote software. This port must
be specified in the Fusion Remote Software to connect to the
DVR.
Note Center Port 1025 is not available for remote connections. It is used by the
ATI VGA management suite
Image Port Used to transfer the video to the Fusion remote software.
Search Port Used to transfer search information to the Fusion remote
software.
Upgrade Port Used to upgrade software via a remote connection.
Note If connecting to the DVR through a firewall, the above ports must be open to
incoming and outgoing traffic.
Enable 1-way audio from remote client to DVR
Enable RS-232 Keyboard