Replacing The Processor - Dell Inspiron One 2305 Service Manual

Processor: Dell Inspiron One 2305/2310 Service Manual
1 ZIF socket 2 processor
3 ZIF-socket cam screw

Replacing the Processor

1. Follow the instructions in
2. Unpack and replace new processor:
CAUTION: Ground yourself by touching an unpainted metal surface or the computer stand.
Inspiron One 2305
a. Lift the release lever to the release position so that the processor socket is ready for the new processor.
1 processor socket
3 processor
b. Ensure that the release lever on the processor socket is fully extended.
CAUTION: Socket pins are delicate. To avoid damage, ensure that the processor is aligned properly with
the processor socket, and do not use excessive force when you install the processor. Be careful not to
touch or bend the pins on the system board.
CAUTION: You must position the processor correctly in the processor socket to avoid permanent damage to
the processor.
c. Align the pin-1 corners of the processor and processor socket.
d. Place the processor lightly in the processor socket and ensure that the processor is positioned correctly.
e. Pivot the processor socket release lever back towards the processor socket, and snap it into place to secure the
processor.
f. Clean the thermal grease from the bottom of the heat sink.
CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate
thermal bonding, which is a requirement for optimal processor operation.
g. Apply the new thermal grease to the top of the processor.
file:///T|/htdocs/systems/InsOne2310/sr/sm/processo.htm[7/25/2012 10:25:00 AM]
Before You Begin.
2 processor pin-1 indicator
4 release lever