Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the processor fan with the screw holes on the palm rest and keyboard assembly.
2
Replace the two screws (M2.5x5) that secure the processor fan to the palm rest and keyboard assembly.
3
Slide and connect the processor-fan cable into the connector on the system board.
Post-requisites
Replace the
base
cover.
Replacing the processor fan
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the processor fan
16
33
Advertisement
Table of Contents
