Dell Inspiron One 2305 Service Manual page 20

Front Stand: Dell Inspiron One 2305/2310 Service Manual
1 front stand
3 I/O bracket
Replacing the Front Stand
1. Follow the instructions in
2. Slide the five tabs on the I/O bracket into the slots on the front stand.
3. Replace the two screws that secure the I/O bracket to the front stand.
4. Align the screw holes on the front-stand assembly with the screw holes on the computer.
5. Replace the four screws that secure the front-stand assembly to the computer.
6. Replace the back cover (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain
inside the computer. Failure to do so may result in damage to the computer.
7. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
file:///T|/htdocs/systems/InsOne2310/sr/sm/front_st.htm[7/25/2012 10:24:43 AM]
2 screws (2)
4 tabs (5)
Before You Begin.
Replacing the Back Cover).