Back To Contents Page; Replacing The Rear Stand - Dell Inspiron One 2305 Service Manual

Rear Stand: Dell Inspiron One 2305/2310 Service Manual

Replacing the Rear Stand

1. Follow the instructions in
2. Slide the tab on the rear stand hinge into the slot on the chassis.
3. Replace the three screws at the top of the rear stand hinge.
4. Lift the rear stand and replace the two screws at the bottom of the rear stand hinge.
5. Replace the rear stand cover (see
6. Follow the instructions from
7. Replace the back cover (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain
inside the computer. Failure to do so may result in damage to the computer.
8. Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page

file:///T|/htdocs/systems/InsOne2310/sr/sm/stand.htm[7/25/2012 10:24:49 AM]
Before You Begin.
Replacing the Rear Stand
step 4 to step 5 in Replacing the Front
Replacing the Back Cover).
Cover).
Stand.