Dell Inspiron One 2305 Service Manual page 58

Processor Heat-Sink Fan: Dell Inspiron One 2305/2310 Service Manual
1 processor heat-sink fan cable
3 screws (2)
Replacing the Processor Heat-Sink Fan
1. Follow the instructions in
2. Align the screw holes on the processor heat-sink fan with the screw holes on the hex nut screws.
3. Replace the two screws that secure the processor heat-sink fan to the chassis.
4. Adhere the silver foil on the processor heat-sink.
5. Connect the processor heat-sink fan cable to the connector (CPU FAN) on the system board.
6. Replace the system-board shield (see
7. Follow the instructions from
8. Replace the back cover (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain
inside the computer. Failure to do so may result in damage to the computer.
9. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
file:///T|/htdocs/systems/InsOne2310/sr/sm/hs_fan.htm[7/25/2012 10:24:58 AM]
2 processor heat-sink fan
Before You Begin.
Replacing the System-Board
step 4 to step 5 in Replacing the Front
Replacing the Back Cover).
Shield).
Stand.