Dell Inspiron One 2305 Service Manual page 38

Antenna-In Connector: Dell Inspiron One 2305/2310 Service Manual
Replacing the Antenna-In Connector
1. Follow the instructions in
2. Slide the antenna-in connector into the slot on the system-board shield.
3. Replace the hex nut that secures the antenna-in connector to the system-board shield.
4. Follow the instructions from
5. Follow the instructions from
6. Replace the back cover (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain
inside the computer. Failure to do so may result in damage to the computer.
7. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
file:///T|/htdocs/systems/InsOne2310/sr/sm/tvin.htm[7/25/2012 10:24:51 AM]
Before You Begin.
step 4 to step 8 in Replacing the System-Board
step 4 to step 5 in Replacing the Front
Replacing the Back Cover).
Shield.
Stand.