Replacing The Processor Fan And Heat-Sink Assembly; Procedure; Post-Requisites - Dell Inspiron 11-3169 Service Manual

Replacing the processor fan
and heat-sink assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the processor fan and heat-sink assembly with
the screw holes on the system board.
2 In sequential order, (indicated on the heat sink), tighten the captive
screws that secure the processor fan and heat-sink assembly to the
system board.
3 Adhere the tape that secures the processor fan to the display-cable
bracket.

Post-requisites

1 Replace the battery.
2 Replace the base
34
computer. After working inside your
cover.
After working inside your