Removing The Processor Module; Replacing The Processor Module - Dell Latitude D531 Service Manual

Back to Contents Page
Processor Module
Dell™ Latitude™ D531 Service Manual
Removing the Processor Module
Replacing the Processor Module
Removing the Processor Module
CAUTION:
NOTICE:
as the back panel on the computer.
NOTICE:
to prevent intermittent contact between the cam screw and processor.
1. Follow the instructions in
2. Remove the processor thermal-cooling assembly (see
NOTICE:
3. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
NOTE:
the direction to turn the cam screw.
1 ZIF-socket cam screw
NOTICE:
your skin can reduce the heat transfer capability of the thermal pads.
NOTICE:
4. Lift the processor module from the ZIF socket.
Replacing the Processor Module
CAUTION:
NOTICE:
as the back panel on the computer.
Great user manuals database on
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such
Do not touch the processor die. Press and hold the processor down on the substrate on which the die is mounted while turning the cam screw
Before Working Inside Your
To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.
The ZIF-socket cam screw secures the processor to the system board. Take note of the arrow on the ZIF-socket cam screw, which indicates
2 ZIF socket
To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor thermal-cooling assembly. The oils in
When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such
UserManuals.info
Computer.
Removing the Processor Thermal-Cooling
3 pin-1 corner of processor
Assembly).