Sewing Start And End Backtack Stitches - Brother S-7780A Instruction Manual

3-2. Sewing start and end backtack stitches

0841M
Setting start backtack stitches
1
Setting end backtack stitches
2
3
4
Press the
illuminate.
Press the
Press the
illuminate.
Press the
Start backtacking is carried out. After it has finished, normal sewing continues for as long as
the treadle remains depressed.
NOTE:
If the treadle is returned to the neutral position, the sewing machine will continue operating
until the set number of start backtack stitches has been sewn.
End backtacking is carried out. After it has finished, the thread is trimmed automatically and
the sewing machine stops in the needle up position.
NOTE:
・ If the treadle is depressed backward before sewing of the set number of start backtack
stitches is complete, end backtacking will not be carried out.
・ If thread trimming lock is set, the sewing machine will stop in the needle up position without
thread trimming being carried out.
3. USING THE OPERATION PANEL (BASIC OPERATIONS)
key so that the
key to set the number of stitches for A and B.
For example, to select 3 stitches and 4 stitches: A-3, B-4
key so that the
key to set the number of stitches for C and D.
For example, to select 3 stitches and 2 stitches: C-3, D-2
S-7780A
indicator and the key
1350D
indicator and the key
1351D
2159M
2160M
14