Download  Print this page

Sewing Start And End Backtack Stitches - Brother S-7220B Basic Operation Manual

Single needle direct drive needle feed lock stitcher with thread trimmer
Hide thumbs

Advertisement

Table of Contents

5-2. Sewing start and end backtack stitches

0841M
1
Setting start backtack stitches
2
Setting end backtack stitches
3
4
Start backtacking is carried out. After it has finished, normal sewing continues for as long as
the treadle remains depressed.
NOTE:
If the treadle is returned to the neutral position, the sewing machine will continue
operating until the set number of start backtack stitches has been sewn.
End backtacking is carried out. After it has finished, the thread is trimmed automatically and
the sewing machine stops in the needle up position.
NOTE:
• If the treadle is depressed backward before sewing of the set number of start backtack
stitches is complete, end backtacking will not be carried out.
• If the indicator of the thread trimming lock key is illuminated, the sewing machine will
stop in the needle up position without thread trimming being carried out.
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
S-7220B
Example:
2157M
Example:
2158M
2159M
2160M
18

Advertisement

Table of Contents
loading

  Related Manuals for Brother S-7220B