Selecting Finishing Modes (Using The Optional Finishers); Finishing Modes And Finishers (Optional) - Toshiba e-studio 45 Operator's Manual

1. FINISHING MODES AND FINISHERS (OPTIONAL)

There are 3 types of optional finishers (MJ-1011, MJ-1012 and
1
MJ-1013). Functions available differ depending on the type of
the finisher installed.
• Press the key on the basic screen on the right (shaded), and
confirm the finishing modes on the panel.
2
* The touch panel used in this chapter appears when the op-
tional finisher (MJ-1013) with the optional hole punching unit
installed in your copier.
3
4
Console type
• MJ-1012
• MJ-1013 (with saddle stitching function)
5
Trays
6
7
8
9
10
Saddle stitching tray (MJ-1013 only)
11
12
6-2

SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS)

Names of the Finishers
Upper cover
Hole punching unit
(sold separately)
Hanging type
• MJ-1011
Front
cover
Trays
Lower cover