1. IMAGE SHIFT COPYING
With this feature, a margin for binding is created on each copy. You can place a binding margin on either
1
the right or left side of the copy. You can also create binding margins on copies of book originals if you
use this mode in combination with the Dual-Page mode (double-sided) or duplex copying from book
originals. The default of the binding margin is 7 mm, but it can be adjusted to between 0 to 30 mm.
2
3
4
1
Set the original(s).
5
2
Press the EDIT key to enter the editing menu. Then,
press the IMAGE SHIFT key.
6
• If the key for the desired function is not shown, press the
Pre key to switch the screen.
7
8
Providing Right or Left Margin
3
Press the LEFT (or RIGHT ) key according to your
9
binding side.
10
11
12
4-2
USING THE EDITING FUNCTIONS
Page 2-4