3. REPLACE TONER CARTRIDGE
9
Holding the cartridge so that the arrow on its lower
1
side is kept in the position shown on the right, in-
sert the cartridge completely.
2
3
10
Return the cartridge holder back to its original po-
sition.
4
Tip
The amount of toner consumed varies depending on the origi-
nals and the image quality mode.
5
6
11
Install the new toner bag by reversing the procedure
7
used for removing one.
• Refer to the procedure in steps 2 and 3 on page 7-6.
8
When the REPLACE TONER BAG
When the toner bag becomes full of used toner, the REPLACE
TONER BAG
9
pears:
Dispose of used
toner
Replace the toner bag by following the instructions on page
10
7-6.
Note
It is recommended that the used toner bag be replaced at the
11
same time as the toner cartridge.
12
7-8
WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
Installing a New Toner Bag
symbol flashes and this message ap-
SYMBOL (Cont.)
symbol flashes: