Adding Staples - Toshiba e-studio 45 Operator's Manual

5. ADDING STAPLES (Cont.)
1 Note
If test stapling fails to be performed and the following mes-
sage remains displayed, repeat the above procedure from
steps 1 to 7.
2
Set staple cartridge
3
1 By pulling the lever, move the finisher away care-
fully from the copier.
4
5
6
2
Holding the sides of the staple cartridge, slide it out.
7
3 Turn the staple cartridge upside down, and perform
steps 3 to 5 of the procedure for adding staples to
the Console-Type Finisher
8
4 Turn the staple cartridge to its normal position and
push it back into the stapler.
• Insert the cartridge until it is caught by the claw and fixed
with a click sound.
9
Note
If the following message remains displayed, repeat the above
10
procedure from steps 1 to 4.
Set staple cartridge
11
12
7-24
WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
Hanging-Type Finisher
( Page 7-21)
.