To Select A Base; To De-Register A Handset - Motorola CD111 Owner's Manual

Register Handset
2. is highlighted. Press
3. Bases are displayed. If necessary, scroll
new base you wish to register the CD1 handset to and
Select
press .
4. Enter the System PIN and press
0000)
Searching Base X
5. The display shows
chosen base number). When registration is complete,
Handset registered
the display shows
The handset is automatically assigned the next
available handset number.
NOTE
If registration is not successful the first time, please repeat
the process again in case the base registration period ran
out of time.
If there are already 5 handsets registered to the base,
registration will fail. You must de-register a handset before
you can register a new one.
10.2

To select a base

You can register the CD1 handset with up to 4 bases. Once
registered, you can switch between bases, for example,
bases at home and at work.
38
Select
.
U D
or to a
OK
. (default setting =
X
(where is the
.
D
Menu
1. Press , scroll to
D
Select Base
2. Scroll to
3. All the base numbers are displayed.
(In use)
is shown beside the base number where the
handset was previously registered to. Scroll
the base you want and press
Searching Base X...
4. The display shows
complete, the handset returns to standby mode.
10.3

To de-register a handset

Use one handset to de-register another. You cannot de-
register the handset that you are using.
D
Menu
1. Press , scroll to
D
De-register
2. Scroll to and press
3. Enter the System PIN and press
0000)
U D
4. Scroll or to the handset you want to de-register
Select
and press .
Yes
5. Press to confirm or
O
6. Press to return to standby mode.
Registration Select
and press
Select
and press .
U
or
Select
.
. When registration is
Registration Select
and press
Select
.
OK
. (default setting =
No
to cancel.
Registration
.
D
to
.