Using Additional Handsets; Registering An Additional Handset; To Select A Base - Motorola T201I Series Manual

Hide thumbs

Table Of Contents

Table of Contents

You can register up to 4 handsets to your T2I base to extend your phone

system without having to install extension sockets for each new phone.

Each handset can be registered with up to four bases. Then, select your

preferable base.

If you have purchased a T2I multiple pack, all additional handsets come

preregistered to the base.

If you have purchased an additional handset separately, you must register it to

your T2I base before it can be used.

9.1

Note

Handset batteries must be fully charged before you start to register. Hold your

handset close to the base during the registration process. Handsets that were

supplied with your T2I base are already pre-registered.

On the base:

Press and hold

remain in registration mode for 90 seconds.

On the handset:

Press

Scroll

Enter the base number (1-4).

The display will ask for the PIN to be entered. Enter the 4 digit PIN code

(default = 0000) and press

The handset is automatically assigned an available handset number if the

registration is successful. Use this number when making internal calls.

Note

If registration is not successful the first time, please repeat the process again in

case the base registration period ran out of time. If the base is not found after

a few seconds, the handset returns to standby. Try registering again.

If there are already 4 handsets registered to the base, the registration will fail.

You must de-register another handset before you can register a new one.

9.2

You can register the handset with up to 4 bases. Once registered, you can

switch between bases, for example, bases at home and at work.

Press

BASE.

Press

(e.g.

Enter the base number that you want to use. You will hear a confirmation

beep and the display will return to the previous menu.

T200I EN IN.2 UG .indd 30